ZWO EFWMini 5 Position Electronic Filter Wheel for 1.25 and 31mm Filters

This ZWO EFWMini 5 Position Electronic Filter Wheel for 1.25 and 31mm Filters is certainly one of the smallest 5-position filter wheels in the world. it is also extremely lightweight, it weighs 300g only.

Its housing is CNC machined from aircraft grade aluminium alloy.

The stepper motor, that is the heart of any electronic filter wheel, is made by a reliable Japanese company, NPM. You can trust its quality and reliability.

This high quality 5-position filter wheel has been designed mainly for astro photography, especially, but not exclusively for ZWO ASI1600 cameras.

As it is ASCOM compatible, it can be used with other cameras as well.

Up to five filters can be installed in the numbered compartments that feature standard 1.25" filter thread or you can also install 31mm unmounted filters (or semi-mounted Astronomik filters), and each can be selected for your eyepiece or camera from an imaging software.
The filter wheel can be attached to your focuser either by the supplied 1.25” nosepiece adaptor or via a T-thread. There is actually a female T-thread on both sides of the filter wheel.

One compartment can be left empty for unfiltered viewing.
The robustly constructed filter wheel is supplied with a 1.25” nosepiece and a 1.25” eyepiece holder with brass compression ring.

 

Please note: your focuser will require 20mm of additional inward focusing distance from the normal focus position to compensate for the thickness of the filter wheel.

This filter wheel will be a good addition to the new ASI1600 camera (please make sure that your telescope otherwise have enough back focus, of course, e.g. Newtonian telescopes would usually have a back focus issue, unless modified or specially designed for astro photograpy...)

LIMITING F-RATIO

The distance between the filter and sensor is around 10mm when you connect the ASI1600 to this EFW, so a 1.25″ filter won’t have vignetting with a scope with up to f/5 focal ratio and a 31mm filter won’t have vignetting up to a f/2 lens.

The full ZWO EFWMini 5 Position Electronic Filter Wheel for 1.25 and 31mm Filters set includes:

• EFWmini Body
• T2 nosepiece
• 1.25″ Holder-T2
• T2-T2 adapter
• USB2.0 Cable
• 1.25″ filter requirement: threads length shorter than 3mm, height without threads less than 7mm
• 31mm filter requirement: a set of M2 screws and washers needed to fix the filter are included in the package
   

SPECIFICATIONS

• Limiting F-ratio: f/2 with 31mm filters and f/5 with 1.25" filters (calculated with ZWO's 2mm thick filters)
• Thickness: 20mm
• Power consumption: 150 mA at 5 Volts
• ASCOM compatible
• Positions: 5 x 1.25" or 5 x 31mm glass, unmounted or semi-mounted (like Astronomik)
• Weight: 300g